Wireless abutment screw driver 30 Ncm 1.27 hex

The MTDRIVER is designed to assist the dental Professional
to easily and effortlessly close and open prosthetic screws with a 1.27mm hex. Head

• Charge the driver (C-Type Charger)
  (about 50 minutes)
• Insert the 90º head, by turning it onto the driver.
• Insert the 1.27mm bit into the head of the screw driver.
• Open and close buttons, allowing easy and simple operation of the driver.

For cleaning, disconnect the 90º head, clean and place in the autoclave.

Do not autoclave the motor.

*Please note that the driver can reach up to 30Ncm when fully charged.

200RPM